Beak the F11 into two pieces.
Street
light
Rubber paper
Tear off the rubber paper,
and fix H02 on the board as shown.
Trim all the LED wiring to the same length.
Use a craft blade to carefully skim over the plastic to bare
the copper wire. Twist the same color wire together.
Twist the following wire together:
(I) WHITE wire from the battery box with the GREY wire
from LED bulb.
(II) GREY wire from the battery box with the WHITE
wire from LED bulb.
Roll and seal the duly twist
copper with the white tape provided.
GREY wire
from LED
bulb
WHITE wire
from LED bulb
WHITE wire
from battery box
GREY wire
from battery box
Door
Fence
Cart
Fence
Fence
