manualshive.com logo in svg

Dixon FloTech FT555PA, Manual, Page: 14 / 49

Share
Download
Dixon FloTech FT555PA Manual Download Page 14

FloTech FT555PA/PW Automatic Truck Overfill System Tester

Page 14      10902PA Rev C    FT555PA/PW Truck Tester

Max Therm Comps = #    (English or Spanish)
Max 2-Wire Comps = #    (English, French or German)

Press and release the GO button to toggle between 6 and 8 
maximum number of compartments.  Generally, the USA has a 
maximum of 6 compartments signals per one socket and Canada or 
European regions will have a maximum of 8.  Once the correct 
Maximum Compartments count is showing, press and release the 
TEST SELECT button to move to the next SETUP screen.

AutoTest Optic/Therm    (English or Spanish)
AutoTest 5-wire/2-wire   (English, French or German)

Some regions may not have a need to test optic / 5-wire or 
thermistor / 2-wire type systems as none are found in that region.  
Example, trailers in California do not have Thermistor sockets so 
there is no need to perform the Thermistor test.  In this case the 
Optic / 5-wire test would be enabled.

This screen will enable or disable the optic / 5-wire or       
thermistor / 2-wire tests when performing an automatic test of the 
trailer overfill system.  This configuration is only for the automatic 
testing mode.  All four tests are available in the manual test 
selection.

Max Therm Comps = 6

GO = Change

TEST SELECT = Next

Max 2-Wire Comps = 6

GO = Change

TEST SELECT = Next

Summary of Contents for FloTech FT555PA


















































Reviews:

No comments