Safety Information
Owner Must Ensure
• The product is only used as authorized.
• The product is only used when it is in fault-free, fully functional condition, and that the safety equipment is regularly checked
to ensure that it is fully functional.
• The product is only operated, maintained and repaired by personnel with the appropriate qualifications and authorization.
• Checks are made before the product is put into operation to ensure that only the authorized person is in the work area, and no
one is in danger of being injured if the product is in operation.
• The product is checked for visual damage prior to commissioning to ensure that it is only operated when free of faults.
• Any defects are reported immediately to the appropriate supervisor.
• All safety and warning notices attached to the equipment are legible and none are removed.
• The operating instructions are always kept close to the product operation site, in a legible and complete state.
• Personnel are regularly instructed on all occupational safety and environmental protection issues, and are familiar with and
observe the operating instructions, especially the safety instructions contained herein.
• Personnel are trained and supervised to ensure that they follow safety measures, including the obligatory use of
personal protective equipment.
• The product is only connected to pipelines that are depressurized at the time of connection.
• There is no tensile or compressive stress acting on the product connections.
• There is no residual risk at any point where high pressure could occur. High pressure can cause sudden failure in or damage to
the lines and connections.
• Warning notices in the documentation for supplier modules are observed and integrated into the risk assessments in the
workplace.
4
dixonvalve.com • 800.789.1718
BV2C
IOM
