REV A 2017/11/08
877.582.3569
2
FT7500 Series Junction Box
Product Overview
FT7500 series junction boxes are designed to provide a convenient, safe, and protected point of service
for rack cord accessories. When installed correctly, the junction box will protect rack cords from
excessive wear and tear, and cord connections from water and corrosion while in harsh environments.
Features
•
Water-tight construction helps prevents condensation and moisture from causing corrosion on
the with rack connections.
•
Twelve position terminal block for quick replacement of various cord types including optic,
thermistor, ground, and deadman cables.
•
Large internal volume allows ample room for wiring and easy installation.
•
Mesh cord grip reduces cable strain and prevent cable pull-out.
•
Integrated cord hook holds the cable while not in use.
Technical Specifications
Weight: 4.5LBs [2Kg]
Size: 9.5”[24cm]L x 4.6”[12cm]W x 4.0”[10cm]D
Positions: 12
Accepted Cable Diameter range: 0.500”
-
0.625” (1.27cm
-1.59cm)
RACK CORD INSTALLATION
1.
Compress the mesh cord grip then insert the cable install a rack cord into it.
2.
Release the mesh then tighten the fitting to prevent cable twisting and pullout.
3.
Strip cable jacket, being careful not to nick internal conductors as this may shorten the working
life of the cable.
4.
Terminate wires with crimp spade terminals.
5.
Connect wire spades to terminal block, following wiring order specified by rack monitor and rack
cord.