Dixon Bayco FloTech FT530, Manual, Page: 6 / 18

6
SINGLE READ MODE TEST
1)
Be sure the TIM Reader is configured to match the type
of socket used on the trailer (
THERMISTOR or OPTIC ).
See pages 4 and 5 for CONVERSION instructions.
2)
Connect the Trailer Identification Module Reader ( TIM
Reader ) to the socket on the trailer.
3)
Press and immediately RELEASE red READ SWITCH
on TIM Reader housing.
4)
The SERIAL NUMBER of the Truck Identification Module
( TIM ) will be read ONE TIME and the results shown on
the TIM reader display.

If the TIM is working correctly, the SERIAL
NUMBER printed on the TIM will be shown on
the display.

If the TIM is NOT working correctly, the display
will show either “
NO DATA READ
” or
“
INVALID DATA
”.
5)
The display will remain visible for 10 SECONDS and then
will automatically turn OFF .

Pressing the red READ SWITCH a SECOND
time will turn on the LCD BACKLIGHT for
easier night viewing of the display.

Pressing the red READ SWITCH a THIRD time
will turn OFF the TIM Reader before the 10
second auto display time expires.