SIID CONTROLLER PROGRAMING
Page 7 of 13
LAOS - LIMITED ACCESS ON SELECTION
This function is used to set selection(s) which will be limited during certain periods of the day. To view the limited
access on selection condition, press any select button. The display will show "DISABLED" or "ENABLED SEL - #(s)
where # shows the selections that are set for limited access. To change limited access on any selection, press and
hold the desired select button until the message displayed is the desired limited access condition for that selection.
ENABLED SEL - #(s) - Selection(s) displayed are on limited access.
DISABLED - All selections are not on limited access.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
LAOD - LIMITED ACCESS ON DAYS:
This function is used to set the days of the week for limited access. To view the limited access on days condition,
press and let go of any select button. The display will show "ENABLED ON DAYS - #(s)"
Day of Week:
Sunday
1
Wednesday
4
Saturday
7
Monday
2
Thursday
5
Tuesday
3
Friday
6
To change limited access on days:
To Add Days:
Press service switch, "ADD" will appear on display. Press and hold any select button to
scroll through days. Release select button at desired day to turn on limited access. Press
service switch to complete limited access on days decision. This must be done for each day
to be added.
To Remove Days:
Press service switch, "ADD" will appear on display. Press service switch again, "DEL" will
appear on display. Press and hold any select button to scroll through days. Release select
button at desired day to turn off limited access on that day. Press service switch to
complete limited access on days decision. This must be done for each day to be removed.
NOTE: Only one limited access on days change may be made at a time. The service switch must be
pressed before and after each change.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
PER1 - PERIOD 1
This function is used to set time to start and end limited access. To display PER1 start time, press and let go of
select button
1 or 2
. To display PER1 end time, press and let go of select button
3 or 4
.
To Change:
PER1 Start Time:
To change start time, press and hold select button 1 to change hours, and select button 2 to
change minutes. The time will increment or decrement. To change from increment to
decrement, release the select button and press again.
PER1 End Time:
To change end time, press and hold select button 3 to change hours, and select button 4 to
change minutes. The time will increment or decrement. To change from increment to
decrement, release the select button and press again.
NOTE: Start time has to be less than end time. You must set an on and off time when using PER1.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
PER2 - PERIOD 2
Set time to start and end limited access the same as period 1.
Limited access can be enabled for two different periods in one day.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
