1592010320 XJ200 GB r1 3 24 10 2014-FCC
XJ200
1 / 3
XJ200
1.
GENERAL WARNING
1.1
TO BE READ BEFORE USING THIS MANUAL.
This manual forms an integral part of the product and must be kept near the device
for easy and quick consultation.
The device must not be used for purposes different than those described below and
particularly, it cannot be used as a safety device.
Verify the limits of application before proceeding.
1.2
SAFETY PRECAUTIONS
Verify that the connections comply with the instructions in this manual before
connecting the device.
Do not expose the unit to water or humidity: use the device only within the
stipulated working limits, avoiding sudden changes in temperature and high
atmospheric humidity in order to prevent condensation from forming.
Caution: disconnect the electrical connections of the device before any
maintenance.
The module must never be opened.
If the device is faulty or malfunctions, return it to the retailer or to "DIXELL s.r.l."
(refer to address) with a precise description of the fault.
2.
GENERAL DESCRIPTION
The wireless communication modules of the XJ200 range are a radio communication
system for Dixell monitoring systems.
The iCOOLL range consists of the
XJ200
radio module and its power supplier
PW-200J
.
XJ200 can cover a variety of functions within the monitoring network:
a.
Master:
when it is connected to the X-WEB monitoring system.
b.
Slave/Repeater:
when it is connected to the subnets of devices equipped
with RS485.
c.
Repeater:
when it is assigned the function as a simple bridge towards other
subnets that cannot be reached directly by the master.
The XJ200 modules enable 2-way communication between Dixell devices/modules
equipped with an RS485 output that are appropriately connected to each other and the
monitoring unit of the X-WEB ranges, thereby replacing the connection via an RS485
cable.
Up to 200 devices can be connected to the same XJ200 (communication between the
module and the devices is via RS485), thereby covering several workstations with the
same communication module.
The maximum distance possible between the XJ200 modules in an open space (with no
obstacles) is 200 metres. This distance can be remarkably reduced in the presence of
interference such as radio emitters, generators of electrical or magnetic fields that can
affect the proper communication between the XJ200 modules.
The range of serial addresses allowed on the instruments connected to the iCOOLL
modules is from 1 to 244.
N.B. In order to work with the iCOOLL modules, the instruments must be equipped with
an RS485 serial port and use
ModBUS-RTU
communication protocol.
3.
FRONT PANEL
LED:
the module has a few LED signals
POWER
Green - Flashing with a frequency of 1 Hz: the module is ON and running
RS485
Yellow - Data is being transmitted/received via RS485 by the module
RADIO
Green -The module is transmitting via radio
4.
INSTALLATION AND ASSEMBLY
4.1
PACKAGE CONTENTS
3. Bracket
4. Manual
1. Xj200
Sponge
2. Screws
Each XJ200 package contains the following components:
1.
XJ200 radio device
2.
2 self-tapping screws 3.9x6.5T to fix the XJ200 to the fixing bracket
3.
Wall fixing bracket
4.
Instructions manual
4.2
TOOLS TO FIX THE XJ200
4.2.1 DIRECT FIXING TO THE WALL
Parts required for assembly (
not supplied
)
Ø
5 mm
2 x
M5
2 x
Ø
5 mm
1.
To fix the module directly to the wall, use the cut out below to make the 2 holes
“B” at the distance indicated in fig. 1.
TOP
Ø MAX 6mm (0.2”)
8
0.
0
0m
m
(
3.
15
”)
80.00mm (3.15”)
60.00mm (2.36”)
CABLE
A
A
B
B
Fig. 1
2.
Insert the dowels and fix the screws with
a maximum distance of 8 mm from the
head to the wall
3.
Fix the XJ200 to the head of the screws by rotating the container appropriately
