FRONT PANEL
At this point we have all mechanical components in place and ready to attach front panel.
- Screw in the parts, first Mini-jacks then Switches
- Make sure everything is flush against the panel.
- Solder minijacks and switches.
BEWARE the minijack pins are close and may get bridged
- Place the LEDs at their right height and solder them.
BEWARE some resistors are close to the LED solder points. Be careful not to
bridge them as this may cause a short.
- Doublecheck your soldering. Just in case.
_______________________________________________________________________________________
WARRANTY DISCLAIMER
These pre-assembled boards are part of batch used for assembled modules that were tested
right.
All the PCBs were checked with flying probe test. After assembly they all passed an automated
optical inspection and x-ray inspection.
_______________________________________________________________________________________
Summary of Contents for Mutes
Page 6: ......
