12
DiViS
CHANCE-
i
USA Corp
w w w .
DiViS
D V R . c o m
4-3-2. Back Panel Type
1) Back
panel.
2) Sensor Cable connects to the back panel. (right below video connection)
3) The other side of sensor cable connects to IO socket on the DVR board.
4) When connect cable to back panel make sure to leave one pin from each end.
White cable should be facing up.
5) Connect video cable with BNC2 label.
6) Connect video cable with BNC9 label.
7)
Connect between Master and Slave. Without this connection, only master gives TV-out.
8) Sensor Cable connects to the back panel. (left side of the other connection)
9) The other side of sensor cable connects to IO socket on the DVR board.
10)
Connect Watchdog cable.
1
3
1
5
10
2
1
6
4
7
9
8
4
4
