4
3. 16/32CH H.265 NVR Hard disk Installation
Follow the steps to install or replace the hard disk.
Step1. Take out the hard disk mounting bracket and hard disk screws from
the accessory pack.
Step2.
Fix the harddisk on to the harddisk mounting bracket and fix the screws on to the screw
holes as indicated in the diagram. Each set of harddisk brackets can mount 2 harddisks.
Step3. Use the HDD mounting screws attached in the accessory pack to fix
the mounting brackets to the hard drive.
Step4. Connect SATA & Power wire to Hard Disk and put it on right position of the case. Use the
HDD mounting screws attached in the accessory pack to fix the hard drive with bracket
firmly on to the chassis.
