43
Chapter 2: Camera Configuration
Event - Object Detection
Object Detection Configurations
Enable
Enables or disables object detection function.
Detect mode
Configures the methods of object detection, the options are
Object-Counting
,
Line crossing
,
Zone Object-Counting
and
Zone intrusion
.
Object-Counting:
To create a
Object-Counting
area for calculation (no
event trigger), on the live video screen, select the area by holding down
the mouse button and draw the
Object-Counting
lines, release the button
once the desired area is covered. Then select the
Two way
or
One way
option (calculation method) from the
Direction
drop-down menu.
Line crossing:
To create a
Line crossing
area for triggering events, on the
live video screen, select the area by holding down the mouse button and
draw the
Line crossing
lines, release the button once the desired area is
covered. Then select the
Two way
or
One way
option (trigger method)
from the
Direction
drop-down menu. (Note: Object detection function
must be enabled in the
Network Storage
menu to enable event triggers.)
Zone Object-Counting:
To create a
Zone Object-Counting
area for
calculation (no event trigger), on the live video screen, select the area by
clicking the mouse button to specify the first anchor point, then draw a
line to place the second anchor point. Continue to draw lines for the third
and fourth anchor points, then finish off the selection by clicking the first
anchor point. A total of 4 anchor points can be created. Select the
Inside
or
Outside
option (calculation method) from the
Direction
drop-down menu.