4
Preface
▪
Optional modules with Dead Reckoning available
▪
Built-in G-sensor
Power over Ethernet
▪
8-port RJ45 for 10/100/1000 Mbps PoE IEEE 802.3af conformity, total 60W
(NRM303 series)
I/O Interface-Front
PC Function
▪
4x LED indicators for power/storage/WLAN/WWAN
▪
1x CFast socket with cover. 1x Reset button
▪
2x dual USB type A connectors for 1x USB 3.0 + 1x USB 2.0 port
▪
1x DB15 connector
– MCU DIO (2x DI, 2x DO), 1x analog input, 1x speed frequency input,
1x iButton, 1x RS232 (only for RFID reader w/ 12VDC output),
1x direction signal for optional Dead Reckoning module
▪
2x externally accessible SIM card sockets (selectable)
▪
6x antenna holes for WWAN/WLAN/BT/GPS
NVR Function
▪
2x removable 2.5” HDD/SSD trays with lock
▪
1x DB-15 VGA output for live view
▪
1x DB-15 VGA input for PC VGA switch
I/O Interface-Rear
PC Function
▪
8x RJ45 10/100/1000 Mbps PoE ports (NRM303 series)
▪
2x RJ45 10/100/1000 Intel
®
Fast Ethernet with LED (NRM303 series)
▪
1x 9~36VDC input with ignition and 80W typical power consumption
(NRM303 series)
▪
1x dual USB type A connector for USB 3.0 port + USB 2.0 port
▪
2x phone jacks 3.5mm for 1x Mic-in and 1x Line-out
(NRM303 series)
▪
1x DB-15 VGA, resolution up to 2560 x 1600 @ 60Hz
▪
1x DB26 LVDS interface with 12V and USB 2.0
▪
2x DB-9 RS-232/422/485 (w/ optional 3KV isolation protection)
▪
1x 12VDC output (2A) + battery bypass DC output (2A) + SM Bus
▪
1x 16-pin terminal block connector
– 1x CAN Bus 2.0B (onboard)
– 1x OBDII from optional VIOB-OBD-03 module (SAE J1939)
(NRM303 series)
– 1x CAN Bus 2.0B from optional VIOB-CAN-03 module
(NRM303 series)
– 8x GPIO
– (4x Digital inputs, w/ optional 3KV isolation protection)
Input voltage (internal type): 5VDC TTL (default)
Input voltage (source type): 3 ~ 12VDC
– (4x Digital outputs, w/ optional 3KV isolation protection)
Digital output (sink type): 5VDC TTL (default), max current: 20mA
Digital output (source type): 3 ~ 24VDC, max current: 150mA
NVR Function
▪
2x USB type A connectors, 1x Reset button
▪
1x switch for VGA input selection (NVR or PC)
▪
4x LED indicators for power/storage/storage alarm/camera
▪
1x phone jack 3.5mm for 1x Line-out
Power Management
▪
Selectable boot-up & shut-down voltage for low power protection by
Summary of Contents for NRM 303
