| 20 |
He/O
2
Analyzer
Special accessories
8.4 Voltage measuring
Optional measuring cables can be attached to the analyzer to measure electric voltage. After
the “V” connector is plugged in, the analyzer automatically switches to the mode of a simple
low-voltage voltmeter. The voltmeter is designed to be used as a tool when repairing diving
equipment in the field (diving lamp, storage or plain battery check, etc.) The maximum allowed
DC voltage is 40V (any polarity) or 28V AC with sinusoidal wave. The effective value (RMS)
is measured for AC voltage.
Warning:
The voltmeter must not in any case be connected to the power distribution network
or to any equipment connected to mains!
Tank
temperature
sensor
Tank
pressure
sensor
Discharge valve
Connector
DIN G 5/8
Flow regulator
Cut-off valve
