DIVERSITECH MINI-VAC2-010N1, Operation & Maintenance Manual

Page: 3 / 16

!
!
!
!
!
3
• Breathing smoke, fumes, or dusts produced in applications such as welding, cutting, grinding, painting, deburring
are hazardous to user’s health. Proper ventilation or use of well maintained fume extraction and/or dust collection
equipment helps the user avoid these hazards.
• Breathable contaminants may not be visible or have an odor.
• Stop operation and leave the area immediately if 1) breathing becomes difficult, 2) experience dizziness,
impaired vision, 4) or eye/nose/mouth irritation.
1.3 Fume Extraction Hazards
1.2 Users Responsability
1.1 Symbols
SECTION 1 - SAFETY PRECAUTIONS OF FUME & DUST EXTRACTION/COLLECTION
• Improper use can be hazardous. The unit weights 48 lbs, care should be taken when transporting.
• All users must carefully read and understand this instruction manual prior to use
• For maintenance of any and all components, power switch must be off and the power source disconnected
• It is your responsibility to follow all applicable ANSI, OSHA, UL, CSA, National & Local Fire Codes, and other
regulatory guidelines covering the safe use of equipment that extracts fumes, collects dusts, and exhausts
filtered air either indoors or outdoors.
• Before use, inspect the unit for damage and verify it is working properly.
• Only qualified persons should install, operate, maintain, or repair this unit.
• Do not modify or repair the unit with parts or accessories not supplied by the manufacturer.
• Consult filter manufacturer’s instructions for filter use and reuse, including instructions for cleaning.
DO
NOT
USE
READ
BEFORE
USE
This manual contains specific cautionary statements related to worker safety. To protect yourself and
others, read this manual thoroughly and follow as directed before use. Not all hazards of fume & dust
control are listed in this manual, and no hazards related to welding, cutting, grinding, painting, deburring
or other applications are listed. Consult a qualified safety professional.
Do not use this equipment:
• To extract combustible dusts, liquid vapors, aggressive fumes such as acids.
• To extract smoke or fumes above 180°F / 82°C.
• If the power cord has been damaged or ground (third prong) removed.
• Without a filter.
HOT
PARTS
MOVING
PARTS
ELECTRIC
SHOCK
WARNING!
DANGER!
This manual uses several
symbols to highlight specific
hazards. Be familiar with
these symbols and when
you see them in this
manual, read adjoining
warning text to avoid the
hazard.
• Dusts from many welding, cutting, grinding, painting, or deburring applications can be combustible.
• Do not use or install equipment where any potential for combustible fumes or dusts are present, until a
qualified person has indicated it is safe to do so.
• Never use or install equipment where the potential for combustible fumes or dusts are present without a
fire/explosion protection system.
• If you are unsure if the product you purchased is correct for your application, call Diversitech at 1-800-361-3733.
1.4 Dust Collection Hazards