DIVERSITECH FRED CARBO, Operation & Maintenance Manual

Page: 14 / 24

!
SECTION 6 - DECOMMISSIONING
6.1 To Decommission this Product Safely
!
!
6.2 Tools Required
!
• Read and understand SECTION 1: Safety Precautions and SECTION 4: Operation before
maintenance.
• Do not breathe the dust collected from product while changing/cleaning filters or performing
maintenance on this product.
• Disconnect power before performing any maintenance on unit, including filter inspection. The
input power to this unit is high voltage, and touching any live electrical parts can cause fatal
shocks or severe burns. Do not touch live electrical parts.
• Keep away from all mechanical moving parts including motor, gears, and other pinch points
while operating.
• Operating this unit causes some parts to heat to a point that will burn bare hands. Before
maintenance allow parts to cool, or use proper tools and personal protection equipment during
maintenance.
• Machine must be turned off when performing any maintenance.
• Appropriate ear protection is required according to jurisdiction.
6.3 Comformity with Recycling Regulations
14
1. Combination wrench set
2. Socket Wrench set
3. Screwdriver set
These tools above are required for unit dismantling.
• All dismantling procedures should be made in compliance with appropriate laws governing the recycling and
disposal of materials.
• This machine may contain, but is not limited to:
1. Steel
2. Plastic
3. Rubber
4. Electrical Conductors
5. Aluminum
6. Paint
7. Carbon Filter
8. Dust and Debris from use