NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
REV.
ECN NO.
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.
THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS:
ANGLES:
CABINET SQUARENESS
X7000 & X8000 SERIES TABLES
METAL ACTIVITY TABLE
ASSEMBLY INSTRUCTIONS
REV A
3 OF 9
NTS
EMR
3/3/14
NOTE:
1.
EMR
3/3/14
CREATED ASSEMBLY INSTRUCTIONS
A
-
STEP 1:
WITH PROPER OVERHANG (CENTERED ON TOP), ATTACH FRAME TO TOP.
IF YOU HAVE AN HPL, CHEMGUARD, MAPLE, OR SHOPTOP, PRE-DRILL HOLES
7
8
"
DEEP IN TOP USING
1
8
" DRILL BIT TO PREVENT CRACKING.
PLEASE MEASURE PROPER DEPTH.
IF YOU HAVE A PHENOLIC OR EPOXY TOP, APPLY SILICONE ADHESIVE TO STEEL
FRAME AND PRESS FIRMLY ONTO TOP.
MAKE SURE TOP IS CENTERED ON METAL FRAME.
CLAMP FRAME TO TOP AND ALLOW TO SET.
LET CURE FOR 6-12 HOURS.
STEEL FRAME
FACING UP
**NOTE**
BE SURE TOP ASSEMBLY IS
ON A CLEAN SURFACE
TO PREVENT DAMAGE
K:\AutoCAD\Assembly Instructions\X7000 & X8000 SERIES TABLES.dwg, 11/19/2021 10:25:13 AM, DWG To PDF.pc3