NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
REV.
ECN NO.
IN HOUSE ASSEMBLY TEMPLATE
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
W- WORKBENCHES
WOOD WORKBENCH
ASSEMBLY INSTRUCTIONS
REV A
3 OF 4
NTS
EMK
11/3/14
NOTE:
1.
EMK
11/3/14
CREATED ASSEMBLY INSTRUCTIONS
A
-
STEP 1:
LAY TOP ASSEMBLY ON FLOOR WITH APRON SIDE FACING UP.
BE SURE TOP ASSEMBLY IS ON A CLEAN SURFACE TO PREVENT
DAMAGE.
STEP 2:
INSERT HANGER BOLT ON ONE OF THE LEGS
THROUGH THE CORNER BRACKET AND
INSERT LOCK WASHER AND HEX NUT. USING
1
2
" WRENCH OR
1
2
" SOCKET AND TORQUE
WRENCH, SCREW ON THE NUT BUT DO NOT
TIGHTEN ALL THE WAY. REPEAT FOR THE
OTHER LEGS.
STEP 3:
SLIDE LEG BOOT ONTO LEGS WITH
FLARED END TOWARDS THE
BOTTOM OF THE LEG. SCREW LEG
LEVELERS INTO T-NUT ON BOTTOM
OF THE LEGS.
STEP 4:
USING A 4MM ALLEN WRENCH, INSERT THE CONFIRMATS INTO ONE
LEG AND SCREW INTO THE BRACE. REPEAT FOR THE OTHER 3 LEGS.
MAKE SURE BRACES ARE STRAIGHT AND ALL CONFIRMATS ARE TIGHT.
APRON SIDE
FACING UP
INSERT HANGER BOLT
THROUGH HERE WITH LOCK
WASHER AND HEX NUT
LEG BOOT
LEG LEVELER
LEG BRACES
CLOSE UP OF CORNER LEG ASSEMBLY
CLOSE UP OF LEG BOOT AND LEG
LEVELER ASSEMBLY
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\W- WORKBENCHES.dwg, 11/25/2015 2:35:20 PM, DWG To PDF.pc3
