[4]
Assembly Instructions
Items not included but needed for assembly:
1.
½” wrench
2.
#2 Phillips bit
Instructions:
1.
Lay the table on the floor with the apron side up. (Be sure to lay the table on a
clean surface so you don’t damage the tabletop.)
2.
Take each of the table legs and insert the stud bolt through the hole in the steel
corner brace.
3.
Apply a lock washer and a 5/16” nut onto each stud bolt. Tighten each nut using a
minimum of 12 foot-pounds but not exceeding 17 foot-pounds of torque.
