NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
EMK
12/22/14
CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
DWN
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
MBB-7224
MITRE BOX BENCH
ASSEMBLY INSTRUCTIONS
REV A
4 OF 4
NTS
EMK
12/22/14
NOTE:
1.
STEP 5:
USING A 4MM ALLEN WRENCH, INSERT THE CONFIRMATS INTO
ONE LEG AND SCREW INTO THE BRACE. REPEAT FOR THE OTHER
LEG BRACE. MAKE SURE BRACES ARE STRAIGHT AND ALL
CONFIRMATS ARE TIGHT.
STEP 6:
INSERT STRETCHER ONCE LEG BRACES ARE IN POSITION. ATTACH STRETCHER
USING THE CONFIRMATS PROVIDED. GO BACK TO STEP 2 AND TIGHTEN UP
THE HANGER BOLTS FOR EACH LEG USING A
1
2
" WRENCH OR
1
2
" SOCKET AND
TORQUE WRENCH, TO A MINIMUM OF 12FT LBS BUT NOT TO EXCEED 17FT LBS .
STEP 7:
TURN TABLE OVER SO TOP IS UP. SET YOUR TABLE IN
PLACE AND ADJUST THE LEG LEVELERS TO LEVEL THE
TABLE. SLIDE LEG BOOTS DOWN TO THE FLOOR.
LEG BRACE
LEG BRACE
STRETCHER
COMPLETE UNIT SHOWN
