ASSEMBLY TEMPLATE
NOTE:
1.
REVISION LEVEL
EMK
1/12/16
CREATED DRAWING
REV.
A
-
DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
LT-3222
LIGHT TABLE
ASSEMBLY INSTRUCTIONS
REV A
3 OF 3
NTS
EMK
1/12/16
NAME
DATE
DESCRIPTION
ECN NO.
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
STEP 1:
LAY TOP ASSEMBLY ON FLOOR WITH APRON SIDE FACING
UP. BE SURE TOP ASSEMBLY IS ON A CLEAN SURFACE TO
PREVENT DAMAGE .
STEP 2:
INSERT HANGER BOLTS ON THE BACK LEGS THROUGH THE FOUR CORNER
BRACKETS ON THE BACK SIDE OF TABLE AND INSERT LOCK WASHERS AND
HEX NUTS. TIGHTEN NUTS USING A
1
2
" WRENCH OR
1
2
" SOCKET AND TORQUE
WRENCH, TO A MINIMUM OF 12FT LBS BUT NOT TO EXCEED 17FT LBS .
REPEAT PROCESS FOR THE TWO FRONT LEGS.
STEP 3:
SCREW LEG LEVELERS
INTO T-NUT ON
BOTTOM OF LEGS.
STEP 4:
TURN TABLE OVER SO TOP IS UP. SET TABLE IN PLACE
AND ADJUST LEG LEVELERS TO LEVEL THE TABLE.
CLOSE UP OF CORNER LEG ASSEMBLY
FOR BACK LEGS
CLOSE UP OF CORNER LEG ASSEMBLY
FOR FRONT LEGS
CLOSE UP OF LEG
LEVELER ASSEMBLY
APRON SIDE
FACING UP
INSERT HANGER BOLT
THROUGH HERE WITH LOCK
WASHER AND HEX NUT
LEG LEVELER
COMPLETE UNIT
SHOWN
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\LT-3222.dwg, 3/7/2016 7:08:31 AM, DWG To PDF.pc3
