NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
EMK
12/29/14
CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
DT-1, 2 ,3 , & 9 SERIES
SHAIN DRAWING TABLE
ASSEMBLY INSTRUCTIONS
REV A
3 OF 4
NTS
EMK
12/29/14
NOTE:
1.
STEP 1:
LAY TOP ASSEMBLY ON FLOOR WITH APRON SIDE FACING
UP. BE SURE TOP ASSEMBLY IS ON A CLEAN SURFACE TO
PREVENT DAMAGE .
STEP 2:
INSERT HANGER BOLT ON ONE OF THE LEGS THROUGH THE CORNER BRACKET AND INSERT THE LOCK WASHER
AND HEX NUT. USING A
1
2
" WRENCH OR
1
2
" SOCKET AND TORQUE WRENCH, SCREW ON THE NUT BUT DO NOT
TIGHTEN ALL THE WAY. REPEAT FOR THE OTHER LEGS. NOTE: THE TWO LEGS WITH A CHAMFER MUST GO ON THE
FRONT OF THE TABLE WITH CHAMFERED EDGES FACING OUT .
STEP 3:
SCREW LEG LEVELER INTO
T-NUT ON BOTTOM OF LEG.
APRON SIDE
FACING UP
INSERT HANGER BOLT
THROUGH HERE WITH LOCK
WASHER AND HEX NUT
LEG
LEVELER
CLOSE UP OF CORNER LEG ASSEMBLY
CLOSE UP OF LEG LEVELER
ASSEMBLY
SOFT CLOSE
HARDWARE
CLOSE UP OF LEG WITH A CHAMFER
FRONT APRON
LEG WITH A
CHAMFER NEEDS TO
BE FACING OUT
(REPEAT ON OTHER
FRONT LEG)
FRONT LEG
BACK LEG
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\DT-1, DT-2, DT-3,
& DT-9 SERIES.dwg, 11/30/2015 10:29:03 AM, DWG To PDF.pc3
