NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
REV.
ECN NO.
IN HOUSE ASSEMBLY TEMPLATE
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
CDTC-73
TWO-STATION CPU TABLE
ASSEMBLY INSTRUCTIONS
REV D
5 OF 6
NTS
EMK
8/15/14
NOTE:
1.
EMK
8/15/14
CREATED ASSEMBLY INSTRUCTIONS
A
-
STEP 4:
USING THE SUPPLIED HEX HEAD BOLTS, INSERT BOLTS
THROUGH THE FIRST BRACKET, THE LEG, AND THROUGH THE
SECOND BRACKET. ADD LOCK WASHER AND HEX NUT.
REPEAT FOR THE OTHER BRACKET.
STEP 5:
INSERT EACH LEG BRACE IN THE CORRECT LOCATIONS BETWEEN THE LEGS.
MAKING SURE THE BRACES WITH THE STRETCHER HOLES GO ON THE OUTSIDE
AND THE ONE WITHOUT GOES IN THE MIDDLE. ATTACH THE BRACES WITH THE
90MM CONFIRMATS PROVIDED AND TIGHTEN WITH A 4MM ALLEN WRENCH.
INSERT BOTH STRETCHERS ONCE EACH LEG BRACE IS TIGHT AND SECURE.
ATTACH STRETCHERS WITH THE 50MM CONFIRMATS AND THE BRACKETS
PROVIDED. OFFSET BRACKETS ON EACH SIDE SO THE SCREWS DON'T HIT
EACH OTHER. PREDRILL HOLES IN STRETCHER WITH A
1
8
" BIT AND ATTACH
WITH #8 X
3
4
" SCREWS. GO BACK TO STEP 2 AND TIGHTEN THE HANGER BOLT
FOR EACH CORNER LEG USING A
1
2
" WRENCH OR
1
2
" SOCKET AND TORQUE
WRENCH, TO A MINIMUM OF 12 FT LBS BUT NOT TO EXCEED 17FT LBS .
ATTACH CENTER LEG ASSEMBLY
IN BETWEEN THESE TWO APRON
ASSEMBLIES.
EMK
10/15/14
ADDED WIRE MANAGEMENT
B
818
STEP 3:
INSTALL THE CENTER BRACE BETWEEN THE TWO CENTER LEGS. TIGHTEN
WITH THE CONFIRMATS PROVIDED. INSTALL THE UPPER SUPPORT (FLUSH TO
THE TOP) BETWEEN THE TWO LEGS. TIGHTEN WITH THE SCREWS PROVIDED.
ATTACH THE CPU SUPPORTS TO THE UPPER SUPPORT AND CENTER BRACE
4.75" FROM THE BACK LEG. THE BRACES SHOULD FIT INTO THE NOTCHES
ON THE CPU SUPPORTS. ATTACH WITH SCREWS PROVIDED.
CENTER LEG ASSEMBLY
CENTER BRACE
CPU
SUPPORTS
UPPER
SUPPORT
EMK
10/6/15
UPDATED ASSEMBLY COMPONENTS
C
-
STRETCHERS
LEG
BRACES
EMK
10/9/15
UPDATED STEPS 3, 5, AND 6
D
-
4.75
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\CDTC-73.dwg, 11/30/2015 11:05:05 AM, DWG To PDF.pc3
