ASSEMBLY TEMPLATE
REVISION LEVEL
EMK
12/22/16
CREATED DRAWING
REV.
A
-
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.
THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
CABINET SQUARENESS
FRACTIONAL VALUES
ARS-4030
AUGMENTED REALITY SANDBOX
ASSEMBLY INSTRUCTIONS
REV A
14 OF 18
NTS
EMK
12/22/16
NAME
DATE
DESCRIPTION
ECN NO.
STEP 11:
SLIDE ALUMINUM EXTRUSION ASSEMBLY ONTO THE
2"x4"x48"ALUMINUM UPRIGHT .
TIGHTEN ASSEMBLIES TOGETHER.
MAKE SURE ALL SCREWS ARE TIGHT BEFORE MOVING ON.
GO BACK TO STEP 10 AND TIGHTEN PROJECTOR MOUNTING
BLOCK ONTO ALUMINUM EXTRUSION ASSEMBLY 2.
MAKE SURE TOP OF MOUNT SITS 6" FROM THE BOTTOM OF
CORNER L-BRACKET.
FINAL DIMENSION WILL BE ADJUSTED ONCE CAMERA AND
PROJECTOR ARE MOUNTED IN STEP 14.
ALUMINUM EXTRUSION
ASSEMBLY
2"x4"x48" ALUMINUM
UPRIGHT
TIGHTEN ASSEMBLIES
HERE (BOTH SIDES)
6.00
K:\AutoCAD\Assembly Instructions\ARS-4030 - ASSY INSTRUCTIONS.dwg, 4/14/2020 9:25:46 AM, DWG To PDF.pc3
