DIVERSIFIED WOODCRAFTS 2810K Series, Assembly Instructions Manual

Page: 8 / 18

ASSEMBLY TEMPLATE
NOTE:
1.
REVISION LEVEL
EMK 12/1/16 CREATED DRAWING
REV.
A -
DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION: SCALE: SHEET: DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
PERIMETER WORKSTATION
PERIMETER WORKSTATION
ASSEMBLY INSTRUCTIONS
REV A
8 OF 18 NTS
EMK
12/1/16
NAME DATE DESCRIPTION ECN NO.
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
STEP 5:
WITH HELP FROM ANOTHER PERSON, POSITION APRON ASSEMBLY UP TO THE SIDE OF THE
TWO BACK TO BACK CABINETS SO IT IS CENTERED CORRECTLY AND FLUSH WITH TOP OF BASE
CABINETS.
PLACE THE L-BRACKETS IN CORRECT POSITION ON APRON ASSEMBLY AND SIDE OF CABINETS
(SHOULD BE FLUSH WITH TOP EDGE OF CABINETS AND FRONT AND BACK OF APRONS).
MARK ON SIDE OF CABINETS WHERE L-BRACKETS NEED TO BE ATTACHED.
SET APRON ASSEMBLY AND L-BRACKETS DOWN.
CLOSE UP OF APRON ASSEMBLY AND SIDE ON BACK TO BACK
CABINETS SHOWN
BACK
APRON
APRON
ASSEMBLY
SIDE OF CABINET
FRONT
APRON
0.25
DISTANCE FROM BACK
EDGE OF CABINET SIDE TO
BACK APRON
(SAME ON FRONT)
POSITION L-BRACKETS AND APRON ASSEMBLY HERE
(FLUSH WITH TOP EDGES OF FRONT AND BACK
APRONS AND TOP OF BASE CABINETS)
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\2810K & KF, 2820K & KF, 2830K & KF,
2840K & KF SERIES.dwg, 11/29/2018 8:45:41 AM, DWG To PDF.pc3