
9
Instruction:
The following maintenance work must be carried out by instructed and
authorised specialist staff at the set intervals.
RISK!
Risk of Injury The motor(s) need(s) to overrun for several seconds after being shut off.
In this time, you must keep clear of the drive area.
CAUTION!
•
Allow the equipment to cool down sufficiently before all maintenance and repair work
•
Unplug the charger from the socket.
•
Disconnect the plus terminal from the battery.
Activity
Interval
Daily
Weekly
Every 50
hours
Chapter
Check machine for damage
and functional faults and remedy as appropriate.
•
Check the battery charge; charge batteries as appropriate.
•
Empty the refuse container
•
Check sweeping roller & sweeping roller housing for damage, for foreign
clean or replace the sweeping roller
•
Check side brushes for foreign bodies, straps etc.;
remove/clean as appropriate.
•
Check side brush setting;
readjust or replace side brushes as appropriate
•
Check the condition of the dust filter; clean as appropriate
•
Check the charge of the batteries before each usage
•
Undertake all daily maintenance work
•
Check the sealing rubber in the sweeping roller area for
wear and damage; replace as appropriate
•
Check dust filter for damage; replace as appropriate
•
Functional test of the entire machine
•
Check all toothed belts for tension, wear and
operation; replace as appropriate
•
Check the Bowden cables and all moving parts for
their smooth running; replace as appropriate
•
Check the Bowden cables for extension of the pull cable
•
Check safety components (end switch filter cover)
•
Conduct all daily and weekly maintenance work
•
Check battery condition; replace as appropriate
•
Check smooth running of the wheels (replace any bearings)
•
Check all bearings for damage
•
Check all screws and fastenings
•
Check all covers and steel parts for firm seating
•
Check the operation of the charger
•
CAUTION!
In the event that damage to the machine is
established, it must not be used until the damage has
been remedied by specialist staff.
bodies and for wear; remove any foreign bodies/
English EN
TIPPING THE SWEEPER
, S
EITE
18
MAINTENANCE WORK / MAINTENANCE TABLE
(13),
16,17
20
14,15
(18),19
21
(12),22
(18),23
(18),23
13,16,
17
13,16,
17
Summary of Contents for Taski balimat 3300
