31
I25
I24
I23
I22
I21
I20
I19
I18
I17
I16
tr
sv
sl
pt
pl
no
nl
it
fr
fi
es
en
de
da
cz
Cleaning the machine
Storage / parking of machine (machine is idle)
Store the machine with the tank cap slightly open, by:
• lifting the tank cap, unscrewing the sieve, and placing it in the hollow
provided.
• Then replace the tank cap on the sieve.
Service, maintenance and care
The correct maintenance of the machine is a precondition for error-free
operation and a long service life.
Service intervals
TASKI machines are high quality machines that have been checked for safety
at the factory by authorised inspectors. Electrical and mechanical components
are subject to wear and/or ageing after longer periods of use.
Service centre
Should you contact us due to a malfunction or for placing an order, please
always state the type, description and the serial number of your machine.
You can find this information on the name plate of your machine, and the
address of your nearest TASKI partner can be found on the last page of this
manual.
Blades replacement
Blade on the inner radius.
Blade on the outer radius
Cleaning or replacing the float (Indication for full recovery tank)
Disassembly:
Optimal result can only be obtained with clean and intact blades!
Caution:
Never clean the machine with high water pressure or a water
hose.
The ingress of water into the machine might cause considerable
damage to mechanical or electrical parts.
• Wipe down the machine with a damp cloth.
We recommend that you disconnect the battery from the machine
using the battery disconnection socket when storing / parking the
machine and when charging the battery.
The sieve holds the tank lid slightly open,
allowing the tank to dry out. As a result, the
formation of mould and unpleasant smells can
be reduced.
Caution:
Only TASKI branded spare parts must be used, otherwise
warranties and liabilities will be omitted!
Symbols:
◊
= at the end of every cleaning operation,
◊◊
= every week,
◊◊◊
= every month,
⊗
= Service Light
Activity
◊ ◊◊ ◊◊◊
⊗
page
Recharge batteries
28
Clean all parts marked yellow
Drain and clean the tanks
30
Clean the machine with a damp cloth
31
Clean the tank lid seal, check for cracks and re-
place if necessary
Maintenance programs by TASKI service made by
TASKI technician
• In order to maintain operational reliability and
availability for use, the service must be carried
out after 250 working hours (option: only with
installed operating hours counter) or at least
once a year.
Shorter intervals are necessary in case of rough environments or special
conditions of use and/or inadequate maintenance.
• Place the clean squeegee unit with the outer radius face down on a solid
surface e.g. table, floor.
• Press one hand onto the squeegee body by the hose connector.
• Grasp the blade with your thumb and forefinger in the middle of the arch and
pull strongly until the metal band clicks open and the blade is released from
the squeegee body.
• Release the metal strap and pull the blade off the squeegee body.
• Clean squeegee (body, metal straps and blades) with a brush.
• Mount the "rotated" or replaced blade onto the squeegee body.
Caution:
Danger of injury from clamping the fingers!
• Lock the metal strap (Check position of mounting slots) into place and press
the centre of it until it ”clicks” into place and presses the blade onto the
squeegee body (Risk of injury).
• Turn the squeegee upside down by placing it on its suction hose connector
and the bumper wheels.
• Loosen the clamping screw of the blade fastener by using an allen key (4).
• Release the metal band and pull the blade off the squeegee body.
• Clean squeegee (body, metal straps and blades) with a brush.
• Mount the "turned" or the new blade on the nozzle body, so the creases
point outward.
• Hook the metal strap into place (Check position of mounting slots) and fix it
with the screwdriver until the blade is pressed onto the squeegee body.
The shape of the blades allow them to be used on all sides before needing
replacement.
• Switch the machine off using the keyswitch and remove the key.
• The yellow suction filter can be easily removed
(quick-fit seal).
• Clean it with water using a brush (let it dry out
well).
• Brush the yellow suction filter with a soft brush
or remove the fluff with a cloth.
