LX20+ Cordless Primary Light
www.diverite.com
7
Attaching the LX20+ to the Hand Mount
The LX20+ can be attached to the hand mount with it on or off of your hand.
The light mount is spring-loaded to hold the light in place, and makes it easy to
attach and remove the light.
To attach the LX20+ to the hand mount on your RIGHT hand:
1.
Unlock the locking lever on the front of the receiver by swinging it open.
2.
Line up the clip on the base of the LX20+ with the receiver on the hand
mount.
3.
Slip the front of the clip on the LX20+ under the front bar of the receiver
on the hand mount.
4.
Push the LX20+ forward and then push down on the LX20+ until it snaps
into place in the receiver.
5.
Lock the receiver by closing the locking lever.
To attach the LX20+ to the hand mount on your LEFT hand:
1.
Unscrew the two flat head screws holding the receiver and locking lever
plate to the hand mount.
2.
Turn the assembly 180 degrees and reattach to the hand mount.
3.
Follow the instructions above for attaching the LX20+ to the hand mount.