Dive Gear Express DGX Gears FIRST, First Stage Service Manual, Page: 24 / 32

8. Screw the Upper Body onto the assembly so that the threads are firmly engaged and install the first
stage handle into one of the ports – Fig. 33. Tighten the parts together by hand until no gap is seen –
Fig. 34.
Fig. 33 Fig. 34
9. Using the pin spanner and first stage handle, tighten the body connection. There is no torque
specification for this. Make sure it is snug. The easiest way to do this is to lay the assembly down on
the rubber pad and use steady, even pressure until no movement is felt - Fig. 35. Set the assembly
aside.
Fig. 35