The Encoder Hardware
The transport-stream hardware encoder MVE105H features;
•
Support standard H.265\H.264 encoding
•
Save bandwidth up to 33% when choose H.265 codec, i.e 1.5 MBps bandwidth will be workable to
transport 1080P video.
•
Audio coding support MPEG1 Audio Layer2
•
CBR/VBR/ABR code rate controlling, 16 kbit/s ~ 32 Mbit/s
•
Support Network interface full-duplex mode 1000M
•
Support HTTP, UTP, RTSP, RTMP, ONVIF, unicast and multicast
•
Output stream format: TS/VES/AES
•
The WEB operating interface, configuration interface in English and Chinese are optional
•
Support web management
•
Support resolution setting
•
Support switching between mono and stereo audio
•
Support decoding the set-top box
•
Support transmit in LAN and WAN
Hardware I/Os
All I/Os are placed on one front for easy installation.
•
Power input:
12 V DC input , using 12 V 1 A power supply
•
Status indication:
Lit if there is network connection, off when there is no network. At reset, if the
light is not on after 10 seconds, the device is restarted.
•
Power indication:
Lit to indicate if the power is normal
•
Reset button:
it is used to reset the device, when turned on, press and hold for 10 seconds,
the device IP will back to factory IP, 192.168.1.168
•
HDMI input:
it is used for HDMI signal input (SDI model MVE105S available)
•
Analog audio input: use to combine analog audio sources with HDMI signals
•
Ethernet port:
10/1000M network port
MVE105H HEVC H.265 Encoder
Page 3
