background image

3

 

 

Dear user, 
Thank you for purchasing our leisure sanitary ware. To enable you to use this product safely 
and effectively, please read this Manual carefully before use.   

I.    Warning for using the steam room 

 

1. Please read this manual carefully before using, and guarantee the reliable grounding.   

2. For the sake of safe use, please don't lock the steam room.   

3. People after drinking, suffering from heart disease or hypertension, the elder and the 

pregnant women is not allowed to use this product.   

4. Any child or person with mental disability use this product must be with the company of a 

normal adult.   

5. Pay attention to anti-slip. 

6. Each time before use, check to confirm the power switch is turned on, and the leakage     

protection , the master valve for cold/hot water supplies . Remember to cut off the master 
supply each time after use.   

7. If you feel uncomfortable, please shut off the power immediately. 

8. Before turn on the faucet, please rotate the handle of cold/hot to the middle of H/C, and 

turn on the faucet, test the water temperature by finger, and then rotate the handle to adjust 
the temperature of water until feel comfortable. 

9. When using steam function, please don’t use the shower or water massage function. 

10. Keep your body away from the outlet of steam, to avoid scald. 

11. Never start the motor without water(if steam room with massage bathtub). 

12.Close the door and do not enter the steam shower when the sterilization is on. 

13.

 

Keep any flammable material or any object with the temperature of over 75

  away 

from the product surface, for it may damage the product and cause the fire. 

14. Don't cut off the power supply immediately each time after the use of the steam. Turn off 
the display first, and switch off the power only when the water remained inside the steam 
generator is completely drained off controlled by the computer to avoid any possible damage 
to the steam generator. 

15. Protect the electric wires from water, dampness, insects and mice when the product is 
unused for a long time. Shut off the master valve for power supply and the cut-off valves in 
the water pipeline immediately. Check the wires and grounding before the start of the 
product which is unused for a long time. 

16. It is required to shut off all functions of the product and wipe the water on hands before 
taking out the power plug. It is strictly forbidden to take out the plug of the active product or 
with a wet hand. 

Summary of Contents for WG-U691























Reviews: