User Manual
Safe Money automatic safe
7
3.
INSTALLATION
The correct installation of the machine provides for it being arranged on a perfectly horizontal
surface.
The machine prepares 4 anchoring holes for fixing it to the floor. By removing the support feet, it is
possible to fix the SAFEMONEY, by means of a plate, to an appropriately prepared surface. For
drilling the surface, use the anchor plate as DIMA.
See the fixing instructions on the following pages.
3.1
TURNING ON
The SAFEMONEY product must be powered at a mains voltage (230 VAC) from an outlet that can
supply a current of at least 2 A; the product is protected against overload currents and short-circuits.
The SAFEMONEY is switched on by switching the power switch (located on the back) from the “O”
position to the “I” position.
The machine is managed through its USB interface from a PC or a similar device that functions as
the “Master”.
The power supply connector, to which the special cable, the switch and the mentioned above USB
port must be connected are placed on the back of the machine.
