19
19
4.1. Scale
Scaling consists of assigning a display value to each input signal value.
display2
display1
input1 input 2
Direct scale
input 2
input1
display1
display2
Reversed scale
With MICRA-E
it is achieved by programming two
coordinates (input1, display1) and (input2, display2),
between which is established a linear relation where to
each input signal value corresponds a display value.
The relationship can be direct or reversed. In order to
obtain more accuracy, points 1 and 2 should be located
approximately at both extremes of the process.
4.1. Scale
Scaling consists of assigning a display value to each input signal value.
display2
display1
input1 input 2
Direct scale
input 2
input1
display1
display2
Reversed scale
With MICRA-E
it is achieved by programming two
coordinates (input1, display1) and (input2, display2),
between which is established a linear relation where to
each input signal value corresponds a display value.
The relationship can be direct or reversed. In order to
obtain more accuracy, points 1 and 2 should be located
approximately at both extremes of the process.