Ditel KOSMOS BETA-M, Manual

Page: 17 / 52

77
77
8.1 - Dimensions and mounting
To mount the instrument into the panel, make a cutout of
92x45mm. Slide the sealing gasket over the instrument's
case to the bezel and insert the instrument through the
panel cutout from the front.
PANEL CUTOUT
92 mm
45
m
m
Place the fixing clips on both sides of the case and push
them over the rear until they touch the panel.
Apply pressure to engage the tabs on the fixing clips to
the slots of the case.
To remove the instrument from the panel, pull outwards
the fixing clips from the rear tabs to disengage and slide
them back over the case.
CLEANING: The font cover should be cleaned
only with a soft cloth soaked in neutral soap
products. DO NOT USE SOLVENTS
SEALING GASKET
PANEL
FIXING CLIPS
8.1 - Dimensions and mounting
To mount the instrument into the panel, make a cutout of
92x45mm. Slide the sealing gasket over the instrument's
case to the bezel and insert the instrument through the
panel cutout from the front.
PANEL CUTOUT
92 mm
45
m
m
Place the fixing clips on both sides of the case and push
them over the rear until they touch the panel.
Apply pressure to engage the tabs on the fixing clips to
the slots of the case.
To remove the instrument from the panel, pull outwards
the fixing clips from the rear tabs to disengage and slide
them back over the case.
CLEANING: The font cover should be cleaned
only with a soft cloth soaked in neutral soap
products. DO NOT USE SOLVENTS
SEALING GASKET
PANEL
FIXING CLIPS