Installation (Read the IMPORTANT SAFETY REQUIREMENTS)
isolation switch
The equipment must be mounted on a DIN rail style DIN EN 50022 inside a plastic
or metal enclosure with a protection level >= IP65. All wiring must be secured. Max cable
sizes 2.5 mm. Connection via two-part screw terminals.
ELECTRICAL CONNECTION - Ensure the supply is isolated before carrying out any installation or wiring. This equipment must be
installed by a qualified person. All electrical wiring must be carried out in accordance with the appropriate regulations for the place of
installation.
CH1 Input
CH2 Input
CH2 Output
CH1 Output
USB
CPU
Power Supply
USB
SUPPLY
(20 to 240) V dc 50/60 Hz
(20 to 240) V dc
Max Power 3W
S1 -
S2 +
205
206
207
208
105
106
107
108
104
103
102
101
204
203
202
201
INPUTS
Thermocouple
203
103
204
104
+
-
RTD
202
102
203
103
203
103
201
101
Slide Wire
208
108
OUTPUTS
Vdc
LOAD
207
107
External Powered mA
+
-
207
107
205
105
Internal Powered mA
LOAD
207
107
Vout
206
106
Voltage Output
+
-
205
105
201
101
204
104
202
102
+
Input Connections For cable length >3 metres use screen or twisted pair cables. Maximum cable run 30 metres.
Output connections for cable length >3 metres use screen or twisted pair cables. For current outputs max cable run 1000 metres, Voltage
output 30 metres.
Supply maximum cable run 30 metres if using a DC supply. As stated in the IMPORTANT SAFETY REQUIREMENTS the supply must be fused with
a 1 A (T) fuse and provision provided to isolate the circuit when hazardous voltages are being switched.
MT-KOS1720_EN_20181217
30727725
Ambient Range
+ 70 °C Max
- 20 °C Min
Ø 3mm
