Ditel DN109/10D Technical Manual Download

Page: 19 / 65

TECHNICAL MANUAL
LARGE DISPLAYS DN109/NB - DN119/NB - DN189/NB - DN129/NB

CHAPTER 22

INITIALIZATION

22-4

Overview

Fig. 94: Initial window.

The initial screen of the server shows us a vision of the basic information of the viewer

and the necessary buttons to scroll through the different configuration options.

21.

Link to

Overview

. Information showed in real time.

22.

Link to

Global Settings

. It configures the basic settings: Communication interface, data

representation format, brightness, etc

23.

Link to

Network Settings

. Sets LAN communication. It allows the configuration of IPs,

network masks, Gateway, DNS and DHCP.

24.

Link to

WIFI Settings

25.

Link to

Communication Settings.

Sets the parameters for the communication interface

and protocol selected.

26.

Link to

Color Settings

. It allows configuring the color and related parameters in equipment

with a color option.

27.

Shows the current time of the display.

28.

Shows the current date of the display.

29.

Shows the value displayed or:

OvH:

The value exceeds the maximum able to be displayed.

OvL:

The value exceeds the minimum able to be displayed.

TRIMMED:

The number of digits sent is greater that allowed. The display shows

the first ones

. The full number is displayed on the web server, with “(TRIMMED)”

marked

”.

30.

Shows information related to the manufacturing process. It has no relevance to the user.
Technical support may ask for this information to solve device issues.

Summary of Contents for DN109/10D


































































Search results

Summary of Contents for DN109/10D

Reviews:

Related manuals for DN109/10D

Brands by name

Popular brands

Ditel DN109/10D, Technical Manual

Search results

Summary of Contents for DN109/10D

Reviews:

Related manuals for DN109/10D

Brands by name

Popular brands