TECHNICAL MANUAL
LARGE DISPLAYS DN109/NB - DN119/NB - DN189/NB - DN129/NB
CHAPTER 22
INITIALIZATION
22-8
WIFI Settings
Fig. 98: Wifi Settings.
In the WIFI settings, the parameters related to the wireless connectivity of the display are
configured.
23. STATION
Mode: Set the name of the WIFI Network to connect to.
ACCES POINT
(AP) Mode:
Set the name of the display’s WIFI network.
24.
Indicates the connection status.
In
STATION
mode,
if the correct password has not been entered, “
ERROR
” will be
displayed, since the connection could not be made.
25.
Configures the display to
connect to an existing WIFI network (“
STATION
”) or generate
an AP (“
ACCES POINT
”).
By default, the network in AP mode is called
DIRECT_DN_DISPLAY
with password
12345678
.
26.
In
AP
mode allows to select the WIFI channel, between 1 and 11.
27.
Set the security type of the WIFI network.
28.
WIFI password.
AP mode: Sets the wifi network password.
ATTENTION:
If you forget the password, it is necessary to access the display via
wired connection to reconfigure it.
29.
Shows the MAC address. There are two different addresses, depending on whether the
WIFI is configured in STATION or ACCES POINT.
30.
Allows you to configure the IP address.
