4.3.14
Install the belt lock (KSFB4LOCK) (option)
a Fix the belt lock (21) to the extension beam (6) with square nuts (4) and screws (43). Then
tighten the screws (43) with a torque of 10 Nm.
Note! * Cut the extension beam to smaller pieces.
Bi-parting
2/3 of the extension beam for backbone assembly.
1/6 of the extension beam for tension wheel.
1/6 of the extension beam for belt lock.
Left opening
2/3 of the extension beam for backbone assembly.
1/3 of the extension beam for tension wheel and belt lock.
Right opening
2/3 of the extension beam for backbone assembly and belt lock.
1/3 of the extension beam for tension wheel.
4
21
43
DIN 6921 (M6SF)
M6x10 (2x)
6
M6 (2x)
Square nut
4
Extension beam
6
Belt lock
21
Screw
43
1019202-DIen-3.0
Issue 2020-09-28
120
4 Mechanical installation