www.ChronoRemoteControl.com
Registration of remote controls using BIXR1/ BIXR2 radio receiver :
1)
Press the PRG button on the BIX receiver. A “SIG” LED turns on. The receiver
is in a “learning mode”.
2)
Press one of the channel buttons on your remote control. The LED flashes.
3)
Repeat the operation for each remote control (100 max).
4)
10 second after the last transmission, the radio receiver goes back to the
“normal mode”.
Note:
If JR4=ON, all channels are memorized.
If JR4=OFF, only the channel we press (CH button) can be memorized.
How to erase all registered remote controls:
Press the PRG button on the radio receiver. Hold for 3 seconds until the “SIG” LED
starts flashing.
If you wish to erase alle the remotes from radio receiver memory, repeat the action
one more time (Press the PRG button on the radio receiver. Hold for 3 seconds.).
If you only want to erase one remote control, press the previously memorized CH
button on the remote.
The quickly flashing SIG light indicates the operation was successful.
