Cx Series Operator’s Manual
Drill - 61
Operate
Operate
Drill
1. Evaluate jobsite conditions. If drill string needs guidance have Helper (trained on equipment
operation and associated hazards) use drill string guide to align drill string as it enters the soil. See
“Start Bore with Drill String Guide” on page 62.
2. Start engine.
3. Set to low throttle.
4. Operate drilling attachment controls to start clockwise rotation.
5. Slowly move machine forward while maintaining rotation.
6. Carefully monitor progress of bore:
• If rod section starts to bow, stop forward movement of machine and reverse slightly until rod
straightens.
Misuse of machine can cause death or serious injury.
Read and understand operator’s manual and all other safety instructions
before use. Know how to use all controls.
To help avoid injury:
• Never alter controls. Improper control function can cause serious injury.
• Never tape or tie down switch or lever.
Rotating shaft. Crushing will cause death or serious
injury. Stay away.
To help avoid injury:
• Keep everyone at least 10’ (3m) away from drill string and machine unless drill string guide is
needed.
• Never force drilling process. Drilling bit will drift off course and rod sections may bow or break.
Proceed slowly and carefully.
• Never drill with bent rod section.
IMPORTANT:
Always use lowest speed necessary. Increase speed only if more than 5’ (1.5m) of
rod is in the ground and other conditions allow.
