manualshive.com logo in svg

Ditch Witch 750 Tracker, Operator'S Manual, Page: 5 / 25

Share
Download
Ditch Witch 750 Tracker Operator'S Manual Download Page 5

750/752 Display - CONTROLS

5

 

OVERVIEW

750/752 Display - CONTROLS

5

 

OVERVIEW

CONTROLS

OVERVIEW

The 750/752 Display shows the drilling unit operator the same 
information the tracking operator sees up to 2000’ (610 m) away. 
It is designed for use with a 750/752 Tracker equipped with multi-
channel UHF radio and any Ditch Witch beacon. The 750/752 
Display also features an RS232 port for use with the Trac 
Management System option.

A brief description of the buttons and display on the 750/752 
Display follows.

CONTROLS

OVERVIEW

The 750/752 Display shows the drilling unit operator the same 
information the tracking operator sees up to 2000’ (610 m) away. 
It is designed for use with a 750/752 Tracker equipped with multi-
channel UHF radio and any Ditch Witch beacon. The 750/752 
Display also features an RS232 port for use with the Trac 
Management System option.

A brief description of the buttons and display on the 750/752 
Display follows.

Summary of Contents for 750 Tracker


























Reviews:

No comments