DITA Perpetua, User Manual, Page: 8 / 15

8
1. Grasp the body of the plug firmly with one hand and pinch the knurled knob
with the other.
2. With the plug facing you, firmly twist the knurled ring counter-clockwise to
unscrew it.
3. The knurled ring should fall into position once it has been completely unscrewed.
4. Pull out the plug.
1. Gently position the plug to the body while aligning the locating pins.
2. Move the knurled ring into position. While gently pushing the knurled ring
against the screw threads, turn the ring counter-clockwise until you feel
a slight snap. This positions the threads correctly.
3. Holding it in the above position, turn the knurled ring clockwise to tighten it.
4. Do not use a tool such as pliers to loosen or to tighten the knurled ring. It is
designed for finger pressure only.
To change a connector type
To insert a different type of plug