v
English
FAQs
The most common questions – answered at a glance
1. Telekom Speedport Smart 3
Problem: Device cannot be logged in. The router should have the firmware
update (status 9/2019): 010137.3.5.000.1 or newer!
2. Change disty
box
300
settings
Normally, it is absolutely sufficient if you use disty
box
300
in your router or
the DECT base station. No further parameters need to be changed, it does
not matter whether you use VOIP phone or fax, book in and you‘re done.
There are only a few exceptions that require parameter changes.
3. Can the disty
box
300
also be operadet with a VOIP port?
The type of mains connection is not relevant for the operation of disty
box
300
.
It works on all networks.
4. No analog phone at hand?
You no longer have an analogue telephone to set parameters of
disty
box
300
?
No problem: You can set all the dialing procedures via the the keyboard of your
multifunction device.
5. Fax is not transmitted or not
transmitted completely!
Everything is set up correctly, but incoming or
outgoing faxes are not or only incompletely
transmitted?
Please reduce the transmission speed of your
fax machine (baud rate) as much as possible.
disty
box
300
www.disty.de
09/2019
