First Installation
8
4.
First Installation
Position of connectors and controls
All connectors for power and cables are located at the bottom of the back side of the display.
Connection for power cable and on / off switch
Data cable connectors, OSD menu buttons,
Mounting
Distance to wall:
• devices without integrated PC: min.10 mm
• devices with integrated PC: min. 40 mm
Mounting with VESA compatible brackets
The Eco-Line monitors are supplied with VESA-compatible mounting holes and some with wall brackets. The monitor can be mounted
in landscape format and portrait format using VESA-compatible wall mounts whose load capacity corresponds to the weight of the
monitor.
The operating position of the device is perpendicular (90 degrees to the floor). Pay attention to the permissible tilt angle for wall moun
-
ting. The device can be operated both in landscape mode and in portrait mode.
VESA standards 43“: MIS-F 200 x 200 mm (M6)
VESA standards 55“: MIS-F 400 x 200 mm (M6)
VESA standards 86“: MIS-F 800 x 600 mm (M8)
A
B
C
D
D
C
A: 50 mm
B: 50 mm
C: 10 mm/ 40 mm
C: 10 mm/ 40 mm
D: 0 mm
Seitenansicht
Ansicht von oben
oben
unten
