1. Insert 6 cam posts (H2) into holes on Bottom Panel E.
Tighten only until snug. Fit cam holes in the edge of Toe Kick
Panel F over the cam posts. Insert 4 cam locks (H1) into cam
lock holes on Panel F, use a phillips screw driver to turn cam
locks clockwise to secure cam posts.
DO NOT over-tighten.
2. Insert cam posts into Middle Panel G and Front Panel H.
Attach Panel H to Panel G as shown and secure it with cam
locks.
Dowel Hole
E
F
Wood Dowel
G
H
I
I
3. Attach the panel assembly in Step 2 to the bottom panel
as shown. Insert cam locks into cam lock holes and tighten
to secure.
4. Attach Shelf Panels (I) on both sides of the panel assembly
in Step 3 as shown. Use cam locks to secure the shelves.
Join Panels
H2
Insert Cam Lock
H1
Tighten Cam Lock
(a) (b) (c)
How to join 2 boards with CAM lock:
(a) Insert cam post into flat surface of a board and fix it with
a screw driver. Do not over tighten. Fit the hole in the edge
of the joining board over the cam post.
(b) Insert the cam lock into the cam hole. Be sure the
opening section on the back fits the head of the cam post.
(c) Use a screw driver to turn the cam lock clockwise so it
locks onto the head of the cam post. Do not over tighten.
PARTS LIST
No. Qty. Description
Qty.
Description
Side Panel-Left
Front Leg
Top Panel
A
1
B1
C
1
2
H2
74
Cam Post
Back Leg
D
2
Bottom Panel
E
1
H1
74
Cam Lock
Toe Kick Panel
F
1
H3
Grommet Cap
4
H4
Grommet Sleeve
4
Qty. Description
Front Panel
Shelf
Middle Panel
G
1
H
I
1
2
Horizontal Panel
J
1
Back Panel
K
1
L
2
Back Panel
M
2
Corner Panel
Side Panel-Right
B2
1
No.
No.
Tool Needed:
Phillips Screwdriver
ASSEMBLY INSTRUCTIONS
1 of 3
V21.04
2 people
are required
49” TV Console
TVCON49MO
TVCON49SS
TVCON49OK