4. GLASS DOOR ASSEMBLY:
Snap HWI8-4 onto installed HWI16-4.
Install all a�ached parts onto edges of the glass door panel as shown
below. Repeat the step to finish assembing the other glass door.
TOP
GLASS DOOR
BOTTOM
GLASS GLAZING
TOP GUIDE
NE09034-4
GLASS
GLAZING
Install the lock through the hole at bo�om of the assembled glass
door, and secure it with (2) screws from the back.
Insert both glass doors into HWI16-4 by se�ng the wheels onto
the guide rail.
Then carefully place HWI17-4 onto the top of glass doors. Slowly
push HWI 17-4 toward the display case, and align the pre-drilled
holes with holes in the top glass. Fix HWI17-4 with torx screw X1/2”.
Adhere door pull at the proper loca�on on glass doors.
The assembly is finished.
Parts needed:
Glass Door (X2) Glass Glazing (X4)
HWI16-4 (X1) Glass Top Guide (X4)
HWI17-4 (X1) Torx Screw X1/2”L (X2)
HWI8-4 (X1) #6X1/2” Pan head Wood screw (X2)
NE09034-4 (X2) Glass Door Pull (X2)
Connect HWI16-4 with Panel A using #6X1/2” Pan Screws at top of
the assembled storage.
Tips: A rubber mallet can be
used to install NE09034-4.
6 of 6
ASSEMBLY INSTRUCTIONS
Ver. 04/18
