4
ASSEMBLY:
Step 1:
To feed the 8' Power
Cord up the
side pole
, feed the
string through the 1" hole on
the side of the
pole
until it is
sticking out of the far end of
the tube.
Step 2:
Run the string
t
hough
the hole on the baseplat
e
Step 4:
Tie the string that is sticking out the baseplate to the
end of the 8' Power Cord. Pull up from the other end of the
string sticking out the 1" hole on the
side pole
until the 8'
Power Cord is now sticking out the 1" hole on the
side pole
.
Step 5:
Untie the string from the 8' Power Cord.
Step 3:
Using the
Extra
Large Button Head
Socket
Cap Screws and the Fender
Washers attach both
side
poles
to the baseplate