STEP 4
LOCATE (2) END WALLS & (6) CAM LOCKING SCREWS.
USING YOUR SCREWDRIVER, SCREW IN (3) CAM
LOCKING SCREWS INTO THE END WALL.
REPEAT STEP 4 FOR OTHER END WALL.
STEP 5
LOCATE (2) ASSEMBLED SIDE WALLS (FROM STEP 3) & SCREWDRIVER.
INSERT
CAM LOCKING SCREWS FROM SIDE WALL INTO THE SIDE OF(TABLE TOP)
WITH THE ARROWS OF THE CAM LOCKING NUTS FACING OUT.
TO LOCK INTO PLACE:
USE YOUR SCREWDRIVER TO TIGHTEN CAM
LOCKING NUTS, TURNING CLOCKWISE UNTIL TIGHT.
REPEAT STEP 5 FOR THE OTHER SIDE WALL.
END WALL
TABLE TOP
(BOTTOM VIEW)
SIDE WALL (BOTTOM VIEW)
PAGE 6 OF 9
ASSEMBLY INSTRUCTIONS MANUAL
BLKDMPTB WHITE FOLDING DUMP TABLE