Step 1
Install the Pole to the Desktop
Self Drilled Grommet Hole Installation
Option B: Grommet Base Install
1. Position the Pole(a) on the mounting
surface and mark the center hole. Drill a 3/8"
(10mm) diameter hole at the marked position
through the mounting surface.
2. Install the Grommet Base Plate(d) to the
Pole(a) using 3pcs M5x14 Bolts(i), see
Figure 5.
3. Position the Pole(a) on the mounting
surface and secure using the Support Plate
(f), M10 Washer(g), Spring Washer(h) and
M10 Bolt(e). Fasten the M10 Bolt using
provided Wrench(s), see Figure 6.
a
Figure 5
d
i
Figure 6
f
e
g
h
4
Step 2
Connect the Gas Spring Arm(k) and Add-on Arm(l)
k
l
o
p
n
m
o
p
x
