PREPARATION FOR USE
INSTALLING THE BATTERIES
Slide the battery compartment off the remote unit.
Insert 2 "AA" penlight batteries into battery compartment in the direction as indicated by the
polarity (+ / -) markings. Batteries installed with incorrect polarity may damage the remote
unit.
Replace the cover.
SETTING THE TV ON THE DISNEY DVD PLAYER
If you have a Disney DVD player (DVD2000), the TV can
be placed ontop of it.
Make sure that the TV shoes are removed, and rear
feet fit the slots on the DVD player.
Fix the DVD player and the TV together using sup-
plied band and screw. See the diagram.
LANGUAGE SELECTION
If you want to change the language of the on-screen menu, follow the procedure below.
Connect the power cord to a standard AC outlet.
Press
(POWER) to turn on the TV.
Press
(MENU) so that the menu display appears
on the TV screen.
Press
or
(Channel) to select "(ENG)/ESP/FRA".
Selected item is shown in different color.
Select "ENG" (English) or "ESP" (Spanish) or "FRA" (French) by
using
the or (Volume).
Press
(MENU) button to exit the menu.
Note:
No pictures or sound will come from the TV or external input during menu selection.
CHANNEL PRESETTING
Note
: You MUST PRESET channels BEFORE using
or
(Channel).
To preset a channel or to change a preset channel, follow the procedure
below.
Press
(POWER) to turn on the TV.
Press
(MENU) so that the menu display appears on the TV screen.
Press
or
(Channel) to select "CHANNEL SET". Then, press
(Volume).
Press
or
(Channel) to point to "AUTO MEMO". Then, press
(Volume).
The tuner scans and memorizes all active channels in your area.
●
The TV distinguishes between standard TV channels and cable channels.
●
When AUTO MEMO action is completed, the lowest memorized channel
reappears on the screen.
●
When you press
or
(Channel) after selecting AUTO MEMO, the
tuner will stop at the memorized channels only.
●
The TV may recognize TV channels to be CATV channels depending on the receiving condi-
tions. In this case, try the AUTO MEMO action again when the receiving conditions have
improved.
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press
or
(Channel) to point to "CHANNEL SET".
Then, press
(Volume).
3) Press
(Volume) so that "ADD/DELETE" is selected.
4) Use
or
(Channel) to select the channel you wish to
put into memory or to erase from memory.
Note:
The display will return to the screen in about 10 seconds.
Perform "ADD/DELETE" function while this display appears on the
screen.
●
Press
or
(Volume) to light up the channel number
in ORANGE if you wish to add the channel into memory.
●
Press
or
(Volume) to light up the channel number
in LIGHT BLUE if you wish to erase the channel from memory.
5) Press
(MENU) to exit the menu.
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
ly when the power resumes.
4
3
2
1
6
5
4
3
2
1
2
1
3
2
1
PICTURE
CHANNEL SET
(ENG)/ESP/FRA
V-CHIP SET UP
CAPTION (OFF)
ADD/DELETE
AUTO MEMO
ADD/DELETE
AUTO MEMO
PICTURE
CHANNEL SET
(ENG)
/ESP/FRA
V-CHIP SET UP
CAPTION (OFF)
PICTURE
CHANNEL SET
(ENG)/ESP/FRA
V-CHIP SET UP
CAPTION (OFF)
OPERATIONS
WATCHING A TV PROGRAM
1) Press
(POWER) to turn on the TV.
2) Select the desired channel with
or
(Channel).
3) Adjust the volume to the desired listening level using
or
(Volume).
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
SETTING THE SLEEP TIMER
The sleep timer function enables you to shut off the power without pressing
(POWER) after a desired time period.
1) Press
(POWER) to turn on the TV and press
(SLEEP) on the
remote control .
2) You may change the sleep time with pressing the SLEEP
button on the remote control repeatedly. The timer is set
up to 90 minutes, 10 minutes each time
(SLEEP) is
pushed. (The timer display counts up and sleep timer
will be displayed on the screen when you press
(SLEEP) on the remote control.)
Note:
When you disconnect the unit from the AC outlet, or if you have a power failure, the
sleep time will be lost.
CLOSED CAPTION SELECTION
SLEEP 0
To cancel the sleep timer:
Press (SLEEP)
repeatedly
until "
SLEEP 0" is displayed.
You may view specially labeled (cc) TV pro-
grams, movies, news, prerecorded tapes, etc.
with either a dialogue caption or text display
added to the program.
1) Press
(MENU) so that the menu display
appears on the TV screen.
2) Press
or
(Channel) to select "CAP-
TION".
3) Press or (Volume) to select the mode
you wish.
4) When done,
(MENU) to exit the menu.
PICTURE
CHANNEL SET
(ENG)/ESP/FRA
V-CHIP SET UP
CAPTION (OFF)
PICTURE
CHANNEL SET
(ENG)/ESP/FRA
V-CHIP SET UP
CAPTION ( C1)
PICTURE
CHANNEL SET
(ENG)/ESP/FRA
V-CHIP SET UP
CAPTION ( C2)
PICTURE
CHANNEL SET
(ENG)/ESP/FRA
V-CHIP SET UP
CAPTION ( T1)
PICTURE
CHANNEL SET
(ENG)/ESP/FRA
V-CHIP SET UP
CAPTION ( T2)
: Press
or
(Volume).
MOVIE MODE
Set to the most suitable position for the
movie.
[+] : ON
[ - ] : OFF
BRIGHTNESS
Adjust until the whitest parts of the picture are
as bright as you prefer.
[+] : increase brightness
[ - ] : decrease brightness
CONTRAST
Adjust to increase or decrease contrast.
[+] : increase contrast
[ - ] : decrease contrast
COLOR
Adjust to be brilliant or pale color.
[+] : be brilliant color
[ - ] : be pale color
TINT
Adjust to obtain natural skin tones.
[+] : increase green tones
[ - ] : increase red tones
Notes:
●
"+" is achieved by pressing
(Volume)
and "-" by pressing
(Volume).
●
In the above steps, the picture adjustment
display will disappear from the TV screen
after about 10 seconds unless you press any
buttons, even though you may not be fin-
ished. Press
(MENU) and
(Volume)
so that "PICTURE" is selected. Then, press
or
(Channel) repeatedly until the dis-
play returns to the screen.
PICTURE ADJUSTMENT
1) Press
(MENU) so that the menu display appears on the TV screen.
2) Press
(Volume) so that "PICTURE" is selected, then press
(Volume).
3) Select the feature you wish to adjust with
or
(Channel) and adjust it with
or
(Volume).
CONTRAST
BRIGHTNESS
[-]
[+]
MOVIE MODE
OFF
ON
COLOR
TINT
:
Press or (Channel).
PICTURE
CHANNEL SET
(ENG)/ESP/FRA
V-CHIP SET UP
CAPTION (OFF)
PICTURE
CHANNEL SET
(ENG)/ESP/FRA
V-CHIP SET UP
CAPTION (OFF)
EXTERNAL INPUT MODE
When using an external input signal (VCR, DVD or camcorder), connect the player’s audio/video
output cables to the AUDIO IN/ VIDEO IN jacks of your TV. Then press
(VIDEO). Press
(VIDEO) again to return to TV mode.
TV
DVD
1
2
L6310UL.QX33 03.1.23 1:59 PM Page 3
