Disney DPH8010-P User Manual Download Page 9

8

INSTALLATION (CONTINUED)

Battery Installation

To hear the Disney ring when receiving a call, insert three
(3) AAA size batteries into the bottom of the unit as
described below. 

NOTE: 

When the batteries become weak, the unit will

revert back to the standard ring.

1. Remove the Battery Compartment screw.
2. Press in on the Battery Compartment tab and lift off the

Battery Compartment cover.

3. Insert three (3) AAA size batteries, observing the polarity

as shown.

4. Replace Battery

Compartment
and screw.

+

+

+–

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the

battery compartment. Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and

Carbon-zinc) or old batteries with fresh ones.

4. If the device is not to be used for a long period of time, remove the batteries to prevent

damage or injury from possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and

rupture. 
(Follow battery manufacturer’s directions.)

Summary of Contents for DPH8010-P














Reviews: